ADVTR 3D
NMO Antenna mount for prinsu & similar extrusion style roof racks
NMO Antenna mount for prinsu & similar extrusion style roof racks
Mount an NMO antenna base to a Prinsu-style or compatible Front Runner rack with a low-profile stainless-steel plate.
Before you order
- 3/4-inch opening fits most standard NMO bases.
- Includes Prinsu-style stainless mounting hardware; antenna is not included.
- Front Runner installation uses two 5/16-inch (8 mm) bolts.
- Ships in bare 304 stainless; mounting holes are spaced in 1-inch increments.
Couldn't load pickup availability
About this product
About this product
Looking for a simple, durable & reasonably priced way to mount your NMO style antenna to your Off road rig or work vehicle? We have the solution.
Made from 0.074" thick 304 Stainless steel plate right here in the US. Our mount is simple, low profile and universal. Featuring a 3/4" hole for use with most off-the-shelf NMO bases, it will bolt right up to your Prinsu style rack with a max of 3 1/4" bolts. As well as front runner racks with 2 5/16”(8mm) bolts. Holes are spaced in 1" increments to allow the load presented from longer antennas to be properly supported. Can be mounted on the top or the bottom of extrusion for clearance if required.
Included in purchase:
-1x NMO plate
-1x prinsu style rack stainless mounting hardware kit.
-3x 1/4” washers
-3x 1/4” lock nuts
-3x 1/4”x 3/4”lg. carriage bolts
Antenna is NOT included. Mount will ship in a bare Stainless finish. 304 Stainless steel is corrosion resistant in normal outdoor environments, Paint is not required, but can help make the mount stay rust free in more corrosive environments.
Overall dimensions:
3.8" L X 1.78" W X 0.074" T
Backed by our 1-year Limited warranty.
Get connected with our NMO mount!
Will it fit?
Will it fit?
Fits Prinsu-style racks using up to three 1/4-inch bolts, and compatible Front Runner racks using two 5/16-inch (8 mm) bolts.
What’s included & what you’ll need
What’s included & what you’ll need
Antenna is not included.
Front Runner installations require two 5/16-inch (8 mm) bolts; these are not listed in the supplied Prinsu kit.
Installation
Installation
The plate ships in bare stainless. Paint is optional and may help protect it in more corrosive environments.
Specifications
Specifications
Overall dimensions: 3.8 × 1.78 × 0.074 inches.
NMO opening: 3/4 inch.
Mounting-hole spacing: 1-inch increments.
Backed by a 1-year limited warranty.
Share
