ADVTR3D
Baja Designs Angled Rock Light Mount - Universal Fitment
Baja Designs Angled Rock Light Mount - Universal Fitment
4.96 / 5.0
(28) 28 total reviews
The OG affordable rock light mount for Baja Designs. 35° of angle, and it bolts on anywhere you can fit two 1/4" bolts.
Before you order
- Sold individually. Light not included.
- Fits Baja Designs rock and dome lights (2.35" spacing).
- Needs two 1/4" holes, 1" apart.
- Uses the short M4 screws that come with your light.
Couldn't load pickup availability
About this product
About this product
The OG affordable rack light solution with a more universal fitment.
Ever need that perfect amount of light at camp or when doing trail repairs? This Baja Designs rock light mount is a perfect solution. It allows your light pattern to be aimed where it's needed most with an integrated 35° angle from the edge of the roof rack.
The mount is compatible with both the standard BD rock light as well as the Dome light variants. (2.35" bolt spacing) These mounts utilize the M4 hardware that is included with the BD rock lights (the shorter ones). Rock lights are NOT included.
These mounts feature a "universal" flat mounting surface with 2X 1/4" DIA. holes for mounting that are 1" apart. Mount rock lights anywhere you can fit two bolts. This includes the rear, sides, and undersides of most racks, roof top tents etc. Light can be flipped to allow top or bottom wire placement. New version allows for a semi-hidden wire route for prinsu style roof racks. These aren't guaranteed to fit any particular surface, but allow you to run them anywhere you please. Fully compatible with 80/20 nuts or other mounting accessories. For other light/rack combos please visit our shop.
Will it fit?
Will it fit?
Mounting: Anywhere you can fit two 1/4" bolts, 1" apart: the rear, sides and undersides of most racks, rooftop tents, or 80/20 with standard 80/20 nuts. Every setup is different, so check your spacing first.
Running a different light or rack? Check out the rest of our mounts.
What’s included & what you’ll need
What’s included & what you’ll need
- 1 mount
- 2 × 1/4" × 1" socket cap bolts
- 4 × 1/4" flat washers
- 2 × 1/4" locknuts
All hardware is 304 stainless.
You'll need: the 2 short M4 screws that come with your Baja Designs light. Light not included.
Installation
Installation
Flip the light either way for top or bottom wire exit. On Prinsu-style racks you can run the wire semi-hidden.
Mount it with the 1/4" bolts, washers and locknuts. Always use the washers.
Don't overtighten: 2.2 ft-lbs (3 Nm) max on the light screws and 3.7 ft-lbs (5 Nm) max on the 1/4" bolts. Go past that and you can strip the threads.
Specifications
Specifications
Base holes: Two 1/4" holes, 1" apart
Light bolt spacing: 2.35"
Material: ASA-GF
Light threads: Metal M4 heat-set inserts
Hardware: 304 stainless steel
Warranty: 1 year limited
Finish: It's 3D printed, so you'll see some layer lines. Cosmetic only, no effect on performance.
Materials
Materials
- ASA-GF
- Stainless steel
Warranty
Warranty
Baja Designs, Prinsu and 80/20 are trademarks of their respective owners. We're not affiliated with or endorsed by any of them.
Share
Thank you. Item was as described
Mounted it up as a license plate light bracket. Works awesome!
Great design and print !
Awesome sturdy clean product love it perfect fit!
Thanks
Im super happy with the quality, looks even better than the pics. Perfect for how I'm mounting the BajaDesigns dome light on my Sherpa rack.
- 5 stars: 27 (96%)
- 4 stars: 1 (4%)
- 3 stars: 0 (0%)
- 2 stars: 0 (0%)
- 1 star: 0 (0%)
Thank you. Item was as described
Mounted it up as a license plate light bracket. Works awesome!
Great design and print !
Awesome sturdy clean product love it perfect fit!
Thanks
Im super happy with the quality, looks even better than the pics. Perfect for how I'm mounting the BajaDesigns dome light on my Sherpa rack.
Item looks awesome. Cant wait to install it.
Cool and slick item; will order more for sure!
Easily recommend this item. High quality.
Thank you for the mounts, it completely fixed our lighting issue. Appreciate it!
Had a planned trip in a time frame. Seller did quick shipping for me to arrive in time. Great service and quality items.
Thank you!
Well built and fast service
Perfect. Exactly as described, excellent quality.
Used to mount lights in truck bed. Fit perfectly!
These 3D printed mounts work great to add some rock lights to a Prinsu roof rack.
Well made...nice hardware. works well for my application.
Have not installed yet but looking forward to it!
Items are good quality and shipped fast.
Awesome product, works perfectly!! Just what I needed.
Great quality product! Highly recommended
Bought for my son for Christmas gift and it was exactly as described. Arrived fast.
Loved it, perfect fit and worked great
As described, worked great on my Sherpa roof rack.
Great product, still need to mount
Absolutely great printing and well thought out design to flow with the Baja Rock lights.
Quick shipping, and great quality!
Everything went smoothly, no customer service required
Looks to be good quality
Great product and great service!