Install guideHarbor Freight Angled Rock Light Mount - Frontrunner Type

Front Runner rack mount diagram
Front Runner rack mount diagram

Installation

  1. Bolt the light on with the included M4 screws.
  2. Route the wires through the built-in channel and under the rack. No extra spacers needed.
  3. Mount it to the rack with 5/16" bolts, washers and locknuts. Always use the washers.
  4. Don't overtighten the light screws: 2.2 ft-lbs (3 Nm) max. Go past that and you can strip the threads.

In the box

In the box:

  • 1 mount
  • 2 × M4-0.7 × 15mm flanged screws (for the light)

You'll need:

  • 2 × 5/16" × 1" bolts
  • 2 × 5/16" flat washers
  • 2 × 5/16" locknuts

Light not included.

QR code to the product page

Reorder, leave a review, or see full specs: lentdesignworks.com/products/harbor-freight-roadshock-light-front-runner-roof-rack

Questions? sales@lentdesignworks.com